VST3 modulein the NoAMP zipv0.2.1
A lush, glassy ensemble: several detuned voices with a shimmering top that never tips into seasick pitch wobble, plus two tremolos. The meter shows the modulation moving.
| Control | What it does |
|---|---|
| Mode | Ensemble (default): the multi-voice chorus. Trem: a volume tremolo. Harm Trem: lows and highs pulse in opposition, split around 750 Hz. Switching fades the wet out and back in, so it never clicks. |
| Voices | 2 to 6 voices (default 4). More voices, thicker ensemble. Ensemble mode only. |
| Rate | Modulation speed, 0.02 to 8 Hz (default 0.35 Hz). Greyed while Sync is on. |
| Sync + Division | Locks the modulation to the host tempo: 1/1 down to 1/16T (default 1/8). |
| Depth | How far the voices move; in the Trem modes, the tremolo depth. |
| Spread | Stereo spread. In the Trem modes it offsets the right channel; full Spread is an auto-pan. |
| Tone | Dark to bright tilt on the wet. |
| Feedback | Regeneration toward a flanged sound, kept bounded. |
| Mix | Dry/wet (default 50%). |
| Output | Output level, −24 to +12 dB. |
In Trem and Harm Trem, Tone and Feedback do nothing: the delay path is out of the circuit.
This engine is the board's CHORUS card. There it adds a fourth mode, Single (one classic voice), a Stereo switch that moves the chorus after the amps and shows Spread, and Feedback's Auto setting that follows Depth. See CHORUS in the NoAMP manual.
| Engine | 2 to 6 voice modulated delay ensemble with a dispersive top; tremolo and split-band tremolo |
| Sync | host tempo, 10 note values |
